Jacobsen Golf & Turf: HR-5111™

Combines the productivity of a large rotary with the maneuverability of a small mower.

64" Front Rotary and 42" Wing Rotaries - Provide productivity as well as flexibility - 64”, 99” and 134” with individual deck control.
11' Cutting Width and up to an 7.5-mph Mow Speed - Increased productivity up to 8 acres per hour.
R.O.P.S. With Seat Belt Standard - Secure, safe operator seating.
Small 68" Wheel Base and Power Steering - Provide tight turning radius.
All Hydraulic-Driven Motors on Cutting Decks - Reduced maintenance and long component life.

Other Resources

HR-5111™
Engine	Kubota® V2203D 4-cylinder, liquid-cooled diesel
Displacement	131.1 cu. in. (2.14 L)
Horsepower	49 hp (36.5 kW)
Air Cleaner	Dry type Cyclopac air cleaner with restriction indicator light
Cooling	Pressurized, sealed cooling system; coolant capacity: 8 qt. (7.6 L)
Lubrication	Fully pressurized
Oil Filter	Full-flow, replacement spin-on type
Electrical System	45-amp alternator with 12V 750 CCA battery, circuit breakers
Fuel Capacity	20 gal. (75.7 L)

traction & drive
Traction System	Hydrostatic, closed-loop system; variable-displacement piston pump; fixed-displacement piston motor to front differential axle with integral gear reduction; motors on rear wheel electro-hydraulically engage/disengage for four-wheel drive
Deck Drive	Hydraulic motors with integral bearings; self-lubricating
Hydraulic System	17 gal (64.3 L) reservoir; o-ring face seal fittings; charge and return filters; suction screen at tank; oil cooler; diagnostic test ports
Hydraulic Cooling	Hydraulic oil cooler


TIRES, brakes & steering
TIRES
Front	26 x 12-12
Rear	23 x 10.5-12
Service Brakes	Dynamic braking from transmission; hydraulic disc brakes on front wheels
Parking Brake	Independent disc on drive line
Steering	Hydrostatic with rear wheel steering


SPEED
Transport	2WD: 0 - 15 mph (0 - 24.1 km/h); 4WD: 0 - 8.4 mph (0 - 13.5 km/h)
Mow	0 - 7.5 mph (0 - 12 km/h)
Reverse	2WD: 0 - 6 mph (0 - 9.6 km/h); 4WD: Locked out


DIMENSIONS
Weight	3,780 lbs. (1,718 kg)
Length	144 in. (3.66 m)
Height (with R.O.P.S.)	81 in. (2.05 m)
Wheelbase	67.75 in. (1.72 m)
Width	139 in. (3.53 m) transport: 93.5 in. (2.37 m)

NOTE: Specifications, while correct at time of printing, may change without notice. This product has been tested and complies with B71.4 -2004 ANSI voluntary safety specifications for commercial turf equipment and also complies with EU safety regulations.

DECKS & cutting units
Deck number and size	One 64 in. (1.62 m) full-floating front deck; two 42 in. (1.06 m) full-floating wing decks
Construction	10 gauge steel
Caster wheels	Ten 4 x 11 pneumatic tires
Cutting unit lift	Hand operated, lever controlled hydraulic lift system
Weight transfer	Hydraulic weight transfer - adjustable at operator controls
Blades	Seven 23 in. (0.58 m)
Motor/spindle	Hydraulic motors with integral bearings; self-lubricating
Hight-of-cut	1 - 5.5 in. (24.5 - 139.7 mm)
Cutting capacity	8 acres per hour (3.24 ha/hr) at 7.5 mph (12 km/h)
Overall cutting width	134 in. (3.4 m)

Visit our Partners

Jacobsen® A Textron Company